1. Всички продукти на 3M
3М България

3M™ PPS Lids and Liners

3M ID FC110071170
  • Designed for use with 3M™ Paint Preparation System, PPS™
  • Kit contains disposable Midi size disposable: lids with micron filters, liners and sealing plugs
  • Conventional Gravity Cup systems, paint is mixed and measured in mixing cups, then strained through filters into a paint reservoir, where there is often considerable paint waste
  • PPS™ is an all-in-one disposable solution for mixing/measuring, filtering, spraying and temporary storage of closed coating materials
 Още…
Детайли за продукта
  • Designed for use with 3M™ Paint Preparation System, PPS™
  • Kit contains disposable Midi size disposable: lids with micron filters, liners and sealing plugs
  • Conventional Gravity Cup systems, paint is mixed and measured in mixing cups, then strained through filters into a paint reservoir, where there is often considerable paint waste
  • PPS™ is an all-in-one disposable solution for mixing/measuring, filtering, spraying and temporary storage of closed coating materials
  • System enables the Painter the ability to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down), often reducing paint consumption
  • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
  • Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
  • PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems
  • Sealing plugs allow for temporary sealing and protection of non-catalyzed paint materials

Each unit contains 25 lids and liners and 24 sealing caps

Reduces Material Usage by Eliminating the Need for Traditional Mixing Cups and Paint Strainers 3M™ PPS™ Large Kit contains 25 disposable Lids with pre-welded micron filters for straining paint, 25 disposable Liners, and 10 sealing plugs for use with the 3M™ Paint Preparation System (PPS™). The kit will either contain 125 micron filters which are often recommended for water-borne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference the Paint Manufacturer to ensure the recommended filter to strain the paint material. The PPS™ kit allows technicians to mix graduated measurements of up to 28 fluid oz (850 mL) when used with a mix ratio film insert or by weight scale. Mix ratio film inserts sold separately. Large Size PPS™ is ideal for 4+panel repairs. Use this kit with 3M Large Size Cup and Collar part number 16023. Unlike conventional Paint Cup Systems, 3M PPS™ eliminates the need for mixing paint in an additional paint mix cups, then transferring the paint through a separate filter into a paint reservoir. Every time the Painter transfers paint material, there is waste associated in the mixing cup and filter. With PPS™, place PPS’s disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in PPS’s disposable liner, snap-in place the disposable lid (with the pre-welded-in filter), and attach the locking collar to complete the PPS System and you are ready to spray. PPS™ enables the Painter the ability to spray consistently 90 degree to the part, no matter the part orientation (even upside down). This not only improves consistent material transfer, which improves quality, but also reduces paint overspray, and improves paint consumption. When done spraying, simply throw away the disposable lid and liner. PPS™ eliminates the need to clean out the Paint Reservoir associated with conventional paint cup systems. Large Size PPS refers to Paint volume mixes of up to 28 fl oz, or 850mL, ideal for a 4+ panel repairs. Improved Quality, Lower Material Cost, Reduce Solvent Consumption, Improved Productivity, Less Mess and Easier to Use. Why You Should be Using the 3M™ PPS™ Paint Preparation System PPS™ is a all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption, reduces solvent usage by up to 70 percent, and improves the operator’s efficiency by up to percent between the prep (mixing, measuring, and filtering) and clean-up time (time associated with cleaning the paint reservoir and spray gun). PPS is faster, easier, cleaning and an overall cost saving solution. PPS™ Eliminates the Need for Traditional Mixing Cups and Filters Conventional Paint Cup Systems, a Painter needs to mix paint materials in a separate cup, then transfer (or strain) the paint through a filter into a paint reservoir. Every time the Painter transfers paint material, there is waste associated in the mixing cup and filter. With PPS™, place PPS’s disposable liner within the re-usable PPS™ Cup. Then simply mix the paint material in PPS’s disposable liner, snap-in place the disposable lid (with the pre-welded-in filter), and attach the locking collar to complete the PPS System and you are ready to spray. After spraying the Painter has a choice of using a sealing plug to temporary store non-catalyzed paint materials or clean-up. Since the liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. Simply throw the disposable lid and liner in the appropriate approved waste containers specified by the Paint Manufacturers (or local government requirements) and use a small amount of solvent required for cleaning the spray gun and the PPS™ adapter. It is possible to clean your paint gun with as little as 3 fluid ounces (90mL) of solvent. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which also means cleaning solvent savings, solvent disposal savings, and less operator exposure t

Спесификации
Filter Micron Rating
125 μm
Product Type
Large Kit
Volume (Metric)
1 L
Последвайте ни
Посочените по-горе брандове са търговски марки на 3M.
Промяна на местоположението
България - български