3M™ Cushion-Mount™ Plus Plate Mounting Tape E1215, Orange, 1372 mm x 23 m

• Orange, flexo plate mounting tape with air release feature adhesive
• This 0.015 inch (0.38 mm) orange, double coated foam tape has the air release feature with easy plate removal used to mount flexographic print plates.
• Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.
• Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
• Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
• Grooves in the adhesive are created by a cross-hatch pattern from the release liner
• Plate easily demounts from the double coated cushioned tape without adhesive residue
• Grooves in the adhesive are created by a cross-hatch pattern from the release liner
• Plate easily demounts from the double coated cushioned tape without adhesive residue
• Tape also removes cleanly from the sleeve or steel print cylinder
• Flexographic printing, flexographic printers
• Cushioned flexographic plate mounting sticky back foam tape

This 0.015 inch (0.38 mm) orange, double coated foam tape has the air release feature with easy plate removal used to mount flexographic print plates.

Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.