1. All 3M Products
  • 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015H, 1372 mm x 23 m
  • 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015H, 1372 mm x 23 m

    3M ID YP208010618
    • White, flexo plate mounting tape has air release feature with high plate side adhesion
    • 0.38 mm thickness
    • Standard density
    • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
     More...
    Specifications
    Attribute Name
    Value
    Adhesive Type
    Differential Acrylate
    Air Release
    Yes
    Backing Material
    Polyethylene Foam
    Composite Sleeves
    Yes
    Overall Length (Metric)
    23 m
    Overall Width (Metric)
    1372 mm
    Primary Liner
    Polycoated Polyester
    Print Quality
    Combination Printing - Standard
    Print Quality (Series)
    10 Series
    Total Tape Thickness without Liner (metric)
    0,43 Millimetre
    Urethane Sleeves
    Yes
    Product Details
    • White, flexo plate mounting tape has air release feature with high plate side adhesion
    • 0.38 mm thickness
    • Standard density
    • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
    • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
    • Print plates mounted on E1015H will have no air bubbles under the plate due to the air release feature designed into the tape
    • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
    • Plate demounts from the double coated cushioned tape without adhesive residue
    • Tape also removes cleanly from the sleeve or steel print cylinder
    • Flexographic printing, flexographic printers
    • Cushioned flexographic plate mounting sticky back foam tape

    Mount your photopolimeric plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015H. Our 0.38 mm white, double coated foam tape has the air release feature with high plate side adhesion. It is used for combination jobs.

    3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality standard combination print, and is suitable for combination of solids and tone reproduction where solids and process are equally important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.