3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 457 mm x 23 m, 0.05 mm

• Tan flexo plate mounting tape has air release feature with high plate side adhesion
• 0.51 mm thickness
• Soft/Process
• Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
• Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
• Print plates mounted on E1120H will have no air bubbles under the plate due to the air release feature designed into the tape
• Grooves in the adhesive are created by a cross-hatch pattern from the release liner
• Plate demounts from the double coated cushioned tape without adhesive residue
• Tape also removes cleanly from the sleeve or steel print cylinder
• Flexographic printing, flexographic printers
• Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H. Our 0.51 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive and higher plate side adhesive is designed for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.