1. Bulgaria
  2. All 3M Products
  3. Abrasives
  4. Wheels
  5. Deburring & Finishing Wheels
  6. Standard Abrasives™ Type 27 Unitized Wheel 811524, 524, 115 mm x 13 mm x 22 mm

Standard Abrasives™ Type 27 Unitized Wheel 811524, 524, 115 mm x 13 mm x 22 mm

3M ID 66000028366UPC 50051115352367
  • Blends surfaces to a smooth finish
  • Soft density silicon carbide wheel blends surfaces to a fine finish
  • Soft density offers exceptional conformability for applications with close tolerances
  • Cuts faster than Standard Abrasives™ Buff and Blend non-woven products, though with less flexibility
View all details
Attribute Name
Attachment Type
Center Hole
Center Hole Diameter (Metric)
22,225 Millimetre
Form Material
Form Type
Type 27
Max Speed
10000 rpm
Mineral Type
Silicon Carbide
Overall Diameter (Metric)
114,3 mm
Product Form
Product Key
Unitized Wheel
Product Details
  • Blends surfaces to a smooth finish
  • Soft density silicon carbide wheel blends surfaces to a fine finish
  • Soft density offers exceptional conformability for applications with close tolerances
  • Cuts faster than Standard Abrasives™ Buff and Blend non-woven products, though with less flexibility
  • Silicon carbide mineral suits ferrous and non-ferrous metals, including exotic metals and titanium, as well as composites
  • Runs clockwise and counterclockwise, allowing greater versatility
  • Open web is load resistant, contributing to longer abrasive service life
  • Non-woven nylon strands will not melt or smear when heated, reducing potential for unwanted marks and blemishes

Standard Abrasives™ Type 27 Unitized Wheel - 500 Series is our soft density wheel with open web and centre hole, which attaches to a unitised wheel mandrel*. *Sold separately.

Soft Density Silicon Carbide Wheel Polishes with Precise Results
Among Standard Abrasives™ Unitized Wheels, the 500 Series provides the softest density, and is available in medium (MED) and fine (FIN) grade silicon carbide (S/C). The Standard Abrasives™ Type 27 Unitized Wheel - 500 Series combines soft density and sharp-cutting S/C mineral, making these wheels a good match for applications where a fine finish is more important than cut, such as polishing soft metals prior to the coating process. Due to their conformability, these wheels are great for projects with strict tolerances, because they respond to surface irregularities without gouging or undercutting the part. After prolonged use, the wheel may be dressed to maintain its shape.

Choose the Right Wheel for Your Finishing Application
Our Standard Abrasives™ 500 Series includes two Type 27 Wheels:

Wheel 532

  • Fine grade silicon carbide
  • Requires light pressure for fine finishing and polishing
  • Highly conformable
  • Provides clean, bright surface finish on stainless steel
  • Best when run at slower speeds for fine finishes
Wheel 524
  • Medium grade silicon carbide in a denser configuration
  • Similar to Wheel 532, but with extra layer for durability
  • Provides greater rigidity than Wheel 532, for more precise finishing applications
  • Higher cut and finishing rate than Wheel 532
  • Ideal for high contact pressure applications where cut rate and durability are important

Type 27 Fits 4-1/2˝ Right Angle Grinder
A 4-1/2˝ Type 27 Wheel (sometimes called a Type 27 Disc) is designed to fit a right angle grinder with a wheel guard, typically used for fiber discs, flap discs and grinding wheels. Type 27 Wheels have a depressed center to allow grinding at any angle without damaging the surrounding surface with the attachment nut, and are particularly useful for working on internal angles. These unitized wheels are used in conjunction with, and sometimes in lieu of, a coated abrasive resin fiber disc or flap disc. Standard center hole and quick change unitized wheels are also available in a range of sizes (sold separately).

Non-Woven Unitized Construction Offers a Step Up in Density and Durability for Stubborn Surfaces
Standard Abrasives™ Unitized Wheels are a great match for tough deburring, cleaning, blending and finishing applications. They come in a broad range of densities and grades to suit different metals, the degree of aggressiveness required, shape of the part and desired finish. Although used for some of the same tasks as Standard Abrasives™ Buff and Blend products, they are designed with a far stronger and denser construction to support more aggressive applications and accomplish material removal more rapidly. Even though unitized wheels are much stiffer products, the non-woven nylon fibers of the wheel maintain the advantage of responding to surface irregularities while preserving the geometry of the piece, and produce a consistent finish.

Unitized wheels are created by starting with layers of open web material that combines non-woven fiber strands and abrasive mineral with a tough resin bond. These layers of web are then cured and compressed together. By fusing layers of open web, the abrasive gains more toughness and durability, so it can withstand repeated wear.

Ultimately, the wheel's durability is what makes it such a good match for edges. The wheel is tough enough to complete high-pressure edgework without tearing or otherwise disintegrating. Regardless of the diameter or thickness of the wheel, it maintains its structural integrity to remain a stiff and long-lasting abrasive even under high pressure. Additionally, as the layers wear, the wheel can be dressed to maintain its shape.

Load-Resistant Construction Boosts Life and Performance
Standard Abrasives™ Unitized Wheels are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.

The Many Benefits of Standard Abrasives™ Non-Woven Products
Standard Abrasives™ Unitized Wheels offer many benefits for heavy-duty jobs. For all the aforementioned reasons, Standard Abrasives™ Unitized Wheels invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput.

Contact Us

Изпратете ни съобщение

Благодарим ви за интереса към 3M. За да ни помогнете да управляваме и да отговорим ефективно на Вашето запитване, ние учтиво Ви молим да предоставите ключова информация, включително Вашите данни за контакт. Информацията, която предоставяте, ще бъде използвана за отговор на вашата заявка по имейл или телефон от представител на 3M или един от нашите упълномощени бизнес партньори, с които бихме могли да споделим вашата лична информация в съответствие с политиката за поверителност на 3M.

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Изпращане на съобщение

Благодарим ви, че се свързахте с 3M

Получихме вашето съобщение и сега разглеждаме запитването ви
Наш представител ще се свърже с вас по телефона или имейл

An error occurred.