3M™ Mini PPS Lids and Liners

Each unit contains 50 lids and liners and 20 sealing caps

PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun. PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use -- meaning less operator exposure to solvents and reduction in VOCs. Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning. With PPS™ your spray gun functions at any angle. Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painters to spray at any angle without starving the paint gun.

• PPS Mini (6 fl oz, 180 mL) Size Lids and Liners Kits:
• Mini (6 fl oz, 180 mL) Lids and Liner Kit PPS Kit, contains 50 disposable Lids (with pre-welded filters) and Liners for paint mixing, filtering and spraying of coatings (Primer, Sealer, Base-Coat, and Clear-Coat).
• Reduce Material Consumption: Save on Materials (Primer, Sealer, Base-Coat & Clear Coat). Important for the Painter to mix efficiently the quantities for the Important for the Painter to mix efficiently the quantities for the size of the Repair Operation (R.O.) i.e. the area to be repaired.
• 3M™ PPS™ has the ability to reduce solvents by up to 70% from traditional gravity cups, and up to 90% with PPS and 3M Accuspray.
• Reduce cycle times with fast and easy clean up using 3M™ PPS™; often more than 50% time savings. Mix, filter and spray out of a Disposable lid (with pre-welded filter) and Liner.
• System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
• Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
• PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems
• Sealing plugs allow for temporary sealing and protection of non-catalyzed paint materials